Adjust The Volume; Watch Images From External Equipment; Displaying The Source Information - JVC LT-20C70BU Instructions Manual

Adjust the volume

Press the buttons to adjust the volume.
The volume indicator appears and the volume changes as
you press the buttons.
Muting the sound
Press the (muting) button to turn off the
sound.
Pressing the (muting) button again restores the previous
volume level.

Watch images from external equipment

Use the AV button:
Press the
AV button to choose an EXT
terminal.
TV mode
Last
program
EXT-1
number
To use the Programme number 0:
When the TV and VCR are connected only by the Aerial
cable, choosing the Programme number 0 allows you to
view images from the VCR. Set the VCR RF channel to
the Programme number 0 manually. For details, see
"MANUAL" on page 20.
EXT modes
EXT-2 EXT-2 S
EXT-3 S
EXT-3
Remote control buttons and functions

Displaying the source information

You can display the source information and current time on
the screen.
Press the (information) button to display the
i
source information.
Pressing the (information) button changes the display as
i
follows:
01 BBC
STEREO
TV
or
EXT-1 EXT-1
EXT-1
Signal source
• The source information and current time switched by
(information) button.
i
• The source type :
TV/EXT-1/EXT-2/EXT-2 S/EXT-3/EXT-3 S
• If the programme being watched does not have Teletext
transmission, only a box will be displayed at the same
location.
• When watching videos, an incorrect current time
is sometime displayed.
12 : 00
No display
11