Operating Sequence - Electrolux EW 1050 F Instruction Booklet

Operating sequence

Before the first wash we recommend that you pour 2
litres of water into the main wash compartment
of the detergent drawer in order to activate the ECO
valve. Then run a cotton cycle at 60°C, with the
machine empty, in order to remove any
manufacturing residue from the drum and tub.
Pour half a measure of detergent into the main wash
compartment and start up the machine.
1. Place the laundry in the drum
Open the door.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
2. Measure out the detergent
Pull out the dispenser drawer until it stops. Measure
out the amount of detergent recommended by the
manufacturer in a graduated cup and pour it into the
main wash compartment
If you wish to carry out a programme with prewash,
pour detergent into the appropriate compartment
marked .
3. Measure out the additive
If required, pour fabric softener into the compartment
marked , without exceeding the «MAX» mark.
.
4. Select the required programme
Turn the programme selector dial clockwise until the
symbol you want coincides exactly with the pointer at
the top of the dial. The light "START PAUSE" starts
to flash.
5. Select the temperature
Turn the temperature selector dial to the required
value.
6. Select SPEED REDUCTION
NO SPIN option
Press the relevant button repeatedly, to select the
desired option. The corresponding light illuminates.
7. Select the required option
If you select the RINSE HOLD option, the machine
will stop at the end of the programme with the water
still in the tub.
Select "SUPER RINSE " option if you wish the
laundry to undergo two extra rinses, the
corresponding light illuminates.
13
or
, if required