Changing The Language; Meaning Of Messages And What To Do; Resetting Factory Default Settings; Washing - DeLonghi Coffee maker Manual

02_GB-5732131000 4-10-2004
• Press the
test strip (for example, if there are 3 red squares on the test strip, press the button until WATER HARD-
NESS 3 is displayed).
• Press the button to confirm the value. The coffee maker is now programmed to provide the desca-
ling warning when necessary, based on the actual hardness of the water.

12.7 Resetting factory default settings

If you change the original values, the factory default values can be reset as follows:
• Press the
• Press the
• Press the button to reset the factory default values;
• Press the

12.8 Washing

This function can be used by technical service personnel only.

13 CHANGING THE LANGUAGE

To change the language, proceed as follows:
• Press the button for at least 5 seconds until the appliance displays:
and press the
sage in English.

14 MEANING OF MESSAGES AND WHAT TO DO

MESSAGE
FILL TANK
GROUND TOO FINE
ADJUST MILL AND
TURN THE STEAM KNOB
EMPTY GROUNDS CONTAINER
INSERT GROUNDS CONTAINER
34
15:32 Pagina 34
button repeatedly until the number coincides with the number of red squares on the
, button then press the
RESET TO DEFAULT NO
button and the appliance displays "RESET TO DEFAULT YES";
button to exit programming mode or
PRESS OK TO INSTALL ENGLISH
button for at least 3 seconds to confirm. The appliance then displays the setting mes-
• The water tank is empty or is positioned
incorrectly.
• The tank is dirty or encrusted with lime
scale.
• The appliance cannot make coffee
• The coffee runs off too slowly.
• The grounds container is full or missing. •
• After cleaning, the grounds container
has not been replaced.
button repeatedly until the appliance displays:
to change other parameters
MEANING
•
•
•
•
•
WHAT TO DO
Fill the water tank as described in chap-
ter 5, note 6 and insert it fully.
Rinse or descale the tank.
Turn the steam knob anticlockwise (fig.
3) as described in chapter 5 note 10.
Turn the grinding regulator (fig. 15) one
click clockwise (see chapter 7).
Empty the grounds container and clean
as described in chapter 5, note 7, then
replace.
Open the service door and insert the
grounds container.