Table of Contents
Advertisement
SKIPPING THE CHANNELS
Position the cursor to the programme number you wish to skip, then press the
RED (SKIP) (A4) button. A skipped programme is marked with the sign "
at its right end. The channel corresponding to a skipped programme will not
appear on screen when changing channels using PROGRAM UP (A11) /
DOWN (A12) buttons.
MANUAL CHANNEL TUNING
Tuning by ATSS (Auto Tuning Sorting System) is recommendable, as it is the
easiest tuning method. But Manual Tuning is also possible using the following
procedure.
BROADCASTING SYSTEM SELECTION
Select INSTALL menu and using the remote control CURSOR UP (A11) / DOWN
(A12) buttons, move the cursor to SYSTEM menu and select the appropriate system
by the LEFT (A13) or RIGHT (A14) button.
"FRANCE"
France SECAM L/L'
"GB"
Great Britain / Ireland PAL-I/I'
"EURO"
Westen Europe PAL-SECAM B/G
"E/EURO"
Eastern Europe PAL-SECAM D/K
ACTIVATING MANUAL TUNING
Move the cursor to FREQUENCY (channel frequency) menu and press and hold for more than 2 seconds the remote
control CURSOR LEFT (A13) or RIGHT (A14) buttons for searching. When one channel is tuned, the corresponding
station name is indicated automatically in NAME menu.
To tune the next channel, press the remote control CURSOR LEFT (A13) or RIGHT (A14) buttons again.
CHANNEL AND FREQUENCY MENU
If you know the channel or frenquency number you want to search, enter the data by 0...9 buttons.
TV will tune that channel quickly.
PERFORM FINE TUNING
If you are unable to obtain good picture or reasonable sound volume due to poor reception it is possible to perform fine tuning.
- Select the "FREQUENCY" menu.
- Press for less than 2 seconds, the remote control CURSOR LEFT (A13) and CURSOR RIGHT (A14) buttons to activate
_ / +
FINE TUNING
in steps of 0.05 MHz(50kHz).
STORING CHANNEL NAME
When one channel is tuned, the corresponding station NAME will be detected automatically. But in some cases, NAME
will not be detected due to the broadcasting situation. You may put in the channel NAME yourself.
Position the cursor to NAME menu and press the remote control CURSOR RIGHT(A14) button. A cursor appears on the
left end of NAME line ("- - - - - - -"). Then press CURSOR UP (A11) or DOWN (A12) buttons untill you get the right letter or
symbol. Move the cursor to the next position by using CURSOR LEFT (A13) or RIGHT (A14) buttons and repeat the
operation. Press OK (A9) button to store the NAME.
PROGRAM MENU
The number on the right side of the PROGRAM menu indicates the program number of the currently displayed channel.
STORE TO MENU
Select STORE TO menu and select the program number by 0....9 buttons or CURSOR LEFT (A13) or RIGHT (A14) buttons
to which you want to store the currently displayed channel then press OK button.
Warning ! If you store the number already programmed, the previous programmes will be erased automatically.
"
INSTALL
ATSS
EDIT
SYSTEM
CHANNEL
FREQUENCY
NAME
PROGRAM
STORE TO
PICTURE/OK
GB
GB
C 46
671.25
BBC 1
01
01
5
Advertisement
Table of Contents
