Radio Shack 49-2513 Owner's Manual page 10

Indoor/outdoor black & white security camera with motion sensor
Hide thumbs Also See for 49-2513:
Table of Contents

Advertisement

3. Use the supplied A/V cable's yel-
low plug to connect
(yellow) on the the distribution box
to a video input on either your
security monitor or a standard
TV's A/V input jacks.
4. Use the supplied
white plug to connect your moni-
tor's or TV's audio input jack to
(white) on the distribu-
AUDIO OUT
tion box.
Notes:
• If you use this camera with the
Cat. No. 49-2511 9-Inch Secu-
rity Monitor, use the supplied 3-
foot connecting cable to con-
nect the camera to one of the
CA inputs on the monitor. Fol-
low the instructions supplied
with the monitor.
• To use a VCR with the Cat. No.
49-2511 9-Inch Security Moni-
tor, connect the output jacks of
the security monitor to the A/V
input jacks on the VCR. If you
use a standard TV instead, con-
nect the supplied cable from the
distribution box to the VCR's A/
V input jacks. Then connect the
VCR's A/V output jacks to the
TV's A/V input.
• To control a standard VCR so
an alarm starts the VCR record-
ing, use an optional VCR Con-
troller
available through your local
RadioShack store. Connect the
controller to
bution box
10
VIDEO OUT
A/V cable's
(RSU
12135851),
on the distri-
AUX
5. Connect the RJ-6 connector on
the remote motion alarm's cable
to
on the distribution box.
BUZZER
Note: To extend the remote
motion alarm's cable, you can use
RJ-6 extension cable (available
through your local RadioShack
store). However, extending the
cable more than 20 feet (6m)
might result in unreliable opera-
tion of the remote motion alarm.
6. Connect any other alarm devices
(such as a siren or xenon strobe
light) to the
block according to the device's
owner's
manual.
RadioShack
appropriate accessories.
Note: If your TV or monitor has a
built-in microphone and output
jack, you can use the supplied A/V
cable's red plug to connect that
output to
AUDIO IN
distribution box.
7. Once you have made all of the
connections, turn on your monitor
or TV. Then, connect the AC
adapter
from the camera to a
standard AC outlet. The remote
motion alarm's indicator lights
steadily.
/
/
terminal
NC
C
NO
Your
local
store
has
many
(red) on the

Advertisement

Table of Contents
loading

Table of Contents