Connecting An External Monitor - Fujitsu Siemens Computers AMILO Operating Manual

Connecting an external monitor

An analogue monitor is connected to the analogue VGA monitor port, a digital monitor to
the DVI-I monitor port. Monitor output is limited to a maximum of two monitors at any one
time (see "Key combinations", Page
Monitorport Screenport VGAconnection socket Monitor
Digital DVI-I monitor port
► Switch off the notebook and the external monitor.
► Connect the data cable of the external monitor to the monitor port of the notebook.
► First switch on the external monitor and then the notebook.
Using the
the external monitor and the notebook's LCD screen.
You can display the same picture on the external monitor and the
notebook LCD screen simultaneously.
AMILO Notebook operating manual, edition 3
19, section "Toggle output monitor").
key combination, you can toggle back and forth between
Fn + F10
Connecting external devices
Analogue VGA monitor port
57