Using Your Headset; Put Your Headset On - Uniden BT112 User Manual

•
Whenever you turn the headset on, it will automatically try to connect
to whatever device it was connected to last.
•
If the headset loses the connection (e.g., if your phone is out of range), it
reconnects automatically when the phone is back in range. To manually
reconnect, press MFB.
•
If the headset goes more than 1 hour with no connection, it
automatically turns off.

Using Your Headset

Put your headset on

Insert the ear cushion, then wrap the
earhook behind your ear.
Everyone's ear has a sweet spot, a
particular angle of the speaker where
the audio comes in loud and clear.
Take a few minutes to move the headset around until you find the best
angle for the ear cushion.