Preparations; Turning The Power; Selecting The Input Source; Setting The Input Mode - Denon AVR-1709 Owner's Manual

ENGLISH
Playback
Symbols used to indicate buttons in this manual
Button located on both the main unit and the remote control
unit
Button only on the main unit
Button only on the remote control unit
SOURCE SELECT <STATUS> <MASTER VOLUME>
<SOURCE> <PHONES> <DIMMER>
<POWER> <INPUT MODE> BAND
<ON/STANDBY> <SPEAKERS>
[Front]
[ON/SOURCE]
[OFF]
[QUICK SELECT]
SOURCE SELECT
[TUNER]
[MASTER
VOLUME]
TUNING
[MUTING]
[SOURCE
CONTROL 1]
[SOURCE
CONTROL 2]


Preparations

BUTTON
Turning the Power On
<BUTTON>
[BUTTON]
1
<POWER>
Press
The power indicator lights red and the power is set to the standby
mode.
2
<ON/STANDBY>
Press
The power indicator fl ashes green and the power turns on.
[SOURCE SELECT]
b Also press
turns on. In this case the input source is selected by remote
control unit.
[QUICK SELECT]
b Also press
turns on. In this case Quick Select is selected (vpage 46).
Turning the Power Off
<VIDEO SELECT>
<ON/STANDBY>
q Press
TUNING The power is set to the standby mode.
<POWER>
w Press .
[Rear]
The power indicator turns off, and so does the power.
NOTE
[MAIN OFF]
• Power continues to be supplied to some of the circuitry even when
[TUNER]
the power is in the standby mode. When leaving home for long
SOURCE periods of time or when traveling, either press
SELECT the power, or unplug the power cord from the power outlet.
• When the multi-zone power is switched on, and you want to switch
[V.SEL]
off the main zone power, press
TUNING
[MODE]
BAND

Selecting the Input Source

[INPUT]
Select the source using
<SOURCE SELECT>
Turn
between input sources.
If "Rec Select" is selected for the input source, press
<SOURCE SELECT>
before turning
.
[ON/SOURCE].
or
when in standby mode, the power
when in standby mode, the power
[OFF]
or .
<POWER>
to turn off
[MAIN OFF]
.
SOURCE SELECT
.
[SOURCE SELECT]
or press to switch
<SOURCE>
.

Setting the Input Mode

Set the input mode for this source.
<INPUT MODE> [INPUT]
Press or .
Each time you press the button, the input mode display will change.
Auto PCM
EXT. IN Analog
[Selectable items]
Auto
: Detect type of digital input signal and decode and play
automatically.
PCM
: Decode and play only PCM input signals.
DTS
: Decode and play only DTS input signals.
Analog
: Play only signals from analog input.
EXT. IN
: Play only signals from EXT. IN input.
• When a digital signal is properly input, the "
on the display. If the " " indicator does not light, check the
digital input connector assignment and the connections.
• The surround mode cannot be set if the input mode is set to "EXT.
IN".
• Only set "PCM" and "DTS" when playing the respective signals.
DTS
" indicator lights