Phone - Nokia N Series User Manual

Phone

To edit the settings related to making and receiving calls,
press , and select
Call forwarding, Call
Call
Send my caller ID—You can set your phone number to be
displayed to (Yes) or hidden from (No) the person to whom
you are calling, or the value may be set by your service
provider when you make a subscription
(network service).
Call waiting—If you have activated call waiting (network
service), the network notifies you of a new incoming call
while you have a call in progress. Set the function on
(Activate) or off (Cancel), or check whether the function
is activated (Check
Reject call with SMS—Select
to a caller informing why you could not answer the call.
See "Answer or decline a call," p. 98.
Message text—Write a text to be sent in a text message
when you reject a call.
Image in video call—If video is not sent during a video call,
you can select a still image to be displayed instead.
118
Tools > Settings > Phone
restriction, or Network.
(Set by
status).
Yes to send a text message
Automatic redial—Select On, and your device makes a
maximum of 10 attempts to connect the call after an
unsuccessful call attempt. To stop automatic redialing,
> Call, press .
Show call duration—Activate this setting if you want the
length of a call to be displayed during the call.
1-touch dialing—Select On, and the numbers assigned
to the 1-touch dialing keys (
pressing and holding the key. See also "Speed dial a phone
number," p. 93.
network)
Anykey answer—Select On, and you can answer an
incoming call by briefly pressing any keypad key, except
, ,
Line in use—This setting (network service) is shown only if
the SIM card supports two subscriber numbers, that is, two
phone lines. Select which phone line you want to use for
making calls and sending text messages. Calls on both lines
can be answered irrespective of the selected line. If you
select Line 2
service, you will not be able to make calls. When line 2 is
selected,
Tip! To switch between the phone lines, press and
hold
Line change—To prevent line selection (network service),
select Disable
this setting, you need the PIN2 code.
- ) can be dialed by
, and .
and have not subscribed to this network
is shown in the standby mode.
in the standby mode.
if supported by your SIM card. To change