Led Indicator - ikross IKBT14 User Manual

Previous song
Next song
Pause
play
Notes:
When playing music on some mobile phones, the music will be
transmitted to the mobile phone's speaker instead of the headset. You
have to select "transmit the sound via Bluetooth" in the settings menu
and then choose "IKBT14" as speaker device. The music will be
transmitted to the headset. Please refer to your mobile phone's user's
manual for further information.
When the volume is adjusted to max. or min., you will hear a prompt
tone.
If you want to remote control last/next song, pause/play, it needs your
Bluetooth mobile phone or Bluetooth transmitter paird with the headset
to support AVRCP profile, please refer to the user's manual of your
mobile phone or Bluetooth transmitter for further information.

7. LED indicator

1) Charging
LED indicator
Red light on
Red light off
2) Pairing with the Bluetooth device
LED indicator
Red and blue light blink alternately
Blue light quick blink once every 2
seconds
Blue light quick blink twice every 4
seconds
Blue light quick blink three times every
4 seconds
Palying music
Palying music
Palying music
Pausing
Long press "+"button for 2 seconds
Long press "―"button for 2 seconds
Short press multifunction button
Short press multifunction button
Status of the headset
Charging
Finish charging
Status of the headset
Pairing mode
Not connected to a device
Set up HFP or A2DP
connection
Set up HFP and A2DP
connection at the same time
11