Pairing Headsets With Bluetooth Devices; How To Entering Pairing Mode; Function Operation - ikross IKBT14 User Manual

Note:
The headset will turn off automatically if it can not connect any devices
within 5 minutes after turning on so that it can save power.

2. Pairing headsets with Bluetooth devices

1) How to enter pairing mode
Function
Enter pairing
mode
Note:
Pairing mode will last 2 minutes, if the headset can not connect any other
devices after 2 minutes, it will switch standby mode automatically.
2) Pairing headsets with Bluetooth devices
Prior to using the headset for the first time, you have to pair it with a
Bluetooth-enabled cell phone. The pairing procedures are subject to
different models of cell phones. Please refer to your cell phone user's
manual for further information. The general pairing procedures are as
follows:
Please keep the headset and mobile phone within 1 meter when pairing
Make the headsets enter pairing mode(please refer to "How to enter
pairing mode"
Activate your mobile phone's Bluetooth function and search Bluetooth
devices within available range, and select "IKBT14" from the list of
devices shown after search
Operation
Make sure the headset is turned
off, if not,please turn it off first.
Press multifunction button about
6~7seconds, and release it till blue
light and red
alternately.
5
light blink
Indicator
light
Blue light and
Red light blink
alternately.