Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Generac Power Systems MITSUBISHI GAS ENGINE 0G2832
Summary of Contents for Generac Power Systems MITSUBISHI GAS ENGINE 0G2832
- Page 1 Manual Part No. 0G2832 MITSUBISHI ENGINE SERVICE MANUAL...
- Page 2 foreword This manual has been published by GENERAC ® POWER SYSTEMS, INC. to aid our dealers’ mechanics, company service personnel and general con- sumers when servicing the products described herein. It is assumed that these personnel are familiar with the servicing proce- dures for these products, or like or similar products, manufactured and marketed by GENERAC ®...
- Page 3 ... a_2 mitsubishi contents ... This engine has been engineered for use in Generac Power Systems products. The contents of this manual have been reprinted from the original manufacturer’s service and repair manual. 2.4 Liter Gas engine Table of Contents...
- Page 4 2.4 Liter Gas engine Service recommendations ◆ EnginE Oil REcOmmEndatiOns The unit has been filled with “break in” engine oil at the factory. Use a high-quality detergent oil clas- sified “For Service CC, SD, SE or SF .” Detergent oils keep the engine cleaner and reduce carbon deposits. Use oil having the following SAE viscosity rating, based on the ambient temperature range anticipated before the next oil change:...
- Page 5 8 kW - 35 kW small standby gEnERatOR sEts Following is a recommended maintenance schedule for Generac small standby and residential generator sets from 8 kW to 35 kW in size, and applies to both diesel engine and gas engine driven units. The established intervals in the schedule are the maximum recommended when the unit is used in an average service applica- tion.
- Page 6 Liter Gas engine Service recommendations Maintenance Tasks Level 1 Recommended to be done monthly/ 10 hrs. 1. Disable the unit from • operating per the first page warning. 2. Check the engine oil • level. Adjust as neces- sary. 3. Check the engine cool- •...
- Page 7 Maintenance Tasks Level 1 Recommended to be done monthly/ 10 hrs. 14. Visually inspect the unit looking for leaks, wear or damage, loose • connections or compo- nents, and corrosion. Correct as necessary. 15. Test the engine and transfer switch safety devices. Correct and/or adjust as necessary.
- Page 8 Notes...
- Page 68 P.O. BOX 310 EAGLE, WI 53119 Part No. 0G2832 Revision * (07/14/06) Printed in U.S.A.