Advertisement
INTERCONNECTION DIAGRAM
PMIC Power Manager Integrated Control
Generator
power
control
Power Manager
Integrated
Control
Transfer
Switch
The PM-IC is part of the Generac Transfer Switch
A connection box for the power wires is an option.
1 - 200 kW 13.3 Liter
+ 1 - 150 kW 13.3 Liter Gas
Powered Generator
Modules
Standard Enclosed units shown.
Sound attenuated package adds an
additional 26" to the length.
Units can also be non-enclosed for
indoor installations.
Area Space Requirements.
Units can be placed end to end, side by side or wherever room is available. The transfer switch or switches are generally placed
close to the main electric service. Consult State, Federal and Local codes for specific installation requirements.
Power Connections are in one area in the left rear quadrant of the genset.
All controls are through a single 2 wire RS485 connection that can be daisy chained between generators.
GENERAC POWER SYSTEMS,INC.
P.O.BOX 8 WAUKESHA, WI. 53187
262-544-4811 FAX 262-544-0770
©
2003 GENERAC POWER SYSTEMS, INC.
GENERAC POWER SYSTEMS, INC.
Generator
power
control
AIR AND
EXHAUST
OUTLET
TOP SIDE
AIR AND
EXHAUST
OUTLET
TOP SIDE
Typical Installations
All rights reserved.
All specifications subject to change without notice.
PMSC Power Manager System Control
Generator
Gen Bus or
Connection
Cabinet (Opt)
ATS
ATS
Control Wiring
Power Wiring
The PM-SC can control 3 transfer switches and any number of
slave switches. The main connection box would be configured for
the size and number of wires for the specific application.
Electrical
Connections
this area
TOP VIEW
13.3 LITER
Electrical
Connections
this area
TOP VIEW
13.3 LITER
DISTRIBUTED BY:
Bulletin # 0168230SBY MW 06-28-03
MPSG350
Generator
Power
Manager
System
Control
(PM-SC)
ATS
Minimum Clearance
between units
Advertisement
