IBM ThinkPad Dock User Manual page 16

Creating the hardware profile for the dock configuration
1. Turn off the computer.
2. Dock the computer in the ThinkPad Dock or the ThinkPad Dock II.
3. Turn on the computer.
The screen is in the VGA mode. When the Found New Hardware window
appears, the hardware profile is created automatically.
4. Change the screen settings by using the Display Properties window.
Tuning the driver
By default, the Ultrabay 2000 drive within the ThinkPad Dock or the ThinkPad
Dock II is set up in the PIO transfer mode. This is due to the driver design. For
applications such as viewing a DVD and writing a CD-RW, the Ultrabay 2000
drive has to be set up in the DMA transfer mode.
1. Click Start -> Settings -> Control Panel.
2. Double-click the System icon.
3. Click the Hardware tab.
4. Click the Device Manager button.
5. Click View.
6. Click Devices by Type.
7. Click + at the left of the "IDE ATA/ATAPI controllers."
8. Double-click the second Primary IDE Channel.
9. Click the Advanced Settings tab.
10. Click the down arrow at the Transfer Mode in the Device 0.
11. Select "DMA if available."
12. Restart the system.
Attention: With some Ultrabay 2000 devices and application software, tuning
the transfer mode may cause unexpected trouble. In such a case, change the
transfer mode back to PIO.
For Windows XP
You do not need to install any additional device driver for the docking station
CMD IDE controller under Windows XP. Dock your computer in the ThinkPad
Dock or the ThinkPad Dock II, and create a hardware profile for the dock
configuration with Windows XP.
1. Turn off the computer.
2. Dock the computer in the ThinkPad Dock or the ThinkPad Dock II.
3. Turn on the computer. The screen is in the VGA mode. When the Found
New Hardware window appears, the hardware profile is created
automatically.
4. Change the screen settings by using the Display Properties window.
10
ThinkPad Dock, ThinkPad Dock II: User's Guide