NComputing M300 User Manual page 54

Cursor Shadow Enables or disables the shadow seen beneath the mouse cursor. (Mouse shadows
are not supported)
Allow blinking
Enables or disables the blinking cursor effect.
cursor
Enables or disables smoothing which can improve the appearance of fonts in some
Font smoothing
situations at the cost of increased resource usage.
Maximum video Restricts streaming video frame rate to the value entered. Lower values will reduce
frame rate (fps) network traffic when streaming videos to client sessions.
This setting affects the JPEG compression value found in the L-Series/M-Series tab
Video Quality (section 2.4). Lower percentage values will reduce the amount of network traffic
being sent to client sessions at the cost of video quality.
Video streaming This setting enables or disables the advanced video streaming capabilities available
support
to L300 and M300 devices.
Advanced
Allows users to have more than one window open and streaming video at a time
Graphics
per session. Note that video performance may be better when limited to a single
Compression
stream at a time.
(MOJO)
Number of video
This value affects the rate at which the session image is updated. Larger values
frames to skip
reduce network traffic but create a larger delay between updates.
between updates
Audio sample rate Sets the audio sample rate to be used by sessions.
Audio mono
Sets the session to use mono sound.
sound
Audio 8bit sound Sets the session to use 8-bit sound.
Maximum size (in
bytes) of each
Restricts the size of network video updates. Best left at "0" (default value).
network video
update
Packet queue size
Increasing this setting can provide a smoother streaming experience in high-
for high latency
latency networks.
networks
Page 54 of 78
NComputing M300 User Manual rev.02.21.12