EMAXX EMX-IH55M-iCafe User Manual page 36

Intel H55 Series
Load Optimized Defaults
This option opens a dialog box that let you install optimized defaults for all appropriate
items in the Setup Utility. Select <OK> and then <Enter> to install the defaults.
select <Cancel> and then <Enter> to not install the defaults. The optimized defaults place
demand on the system that may be greater than the performance level of the components,
such as the CPU and the memory. You can cause fatal errors or instability if you install the
optimized defaults when your hardware does not support them. If you only want to install
setup defaults for a specific option, select and display that option, and then press <F9>.
Main Advanced
Exit Options
Save Changes and Exit
Discard Changes and Exit
Discard Changes
Load Optimal Defaults
Load Failsafe Defaults
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
Load Failsafe Defaults
This option opens a dialog box that lets you install fail-safe defaults for all appropriate items
in the Setup Utility: Select <Ok> and the <Enter> to install the defaults. Select<Canel>
and then <Enter> to not install the defaults. The fail-safe defaults place no great demand
on the system and are generally stable. If your system is not functioning correctly, try
installing the fail-safe defaults as a first step in getting your system working properly again.
If you only want to install fail-safe defaults for a specific option, select and display that
option, and then press <F8>.
Main Advanced
Exit Options
Save Changes and Exit
Discard Changes and Exit
Discard Changes
Load Optimal Defaults
Load Failsafe Defaults
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
BIOS SETUP UTILITY
Boot Security
Load Optimal Defaults?
[Ok] [Ok]
BIOS SETUP UTILITY
Boot Security
Load Failsafe Defaults?
[Ok] [Ok]
-  -
Power JUSTw00t!
Load Optimal Default
values for all the
setup questions.
F9 key can be used
for this operation.
←
[Cancel]
↑ ↓
Enter Go to Sub Screen
F1
F10
ESC
Power JUSTw00t!
Load Failsafe Default
values for all the
setup questions.
F8 key can be used
for this operation.
←
↑ ↓
[Cancel]
Enter Go to Sub Screen
F1
F10
ESC
User's Manual
Exit
Select Screen
Select Item
General Help
Save and Exit
Exit
Exit
Select Screen
Select Item
General Help
Save and Exit
Exit