EMAXX EMX-IH55M-iCafe User Manual page 25

Intel H55 Series
► PCIPnP
The PCIPnP menu items allow you to change the advanced settings for PCI/PnP devices.
Advanced
Advanced PCI/PnP Settings
WARNING: Setting wrong values in below sections
may cause system to malfunction.
Clear NVRAM
Plug & Play O/S
PCI Latency Timer
Allocate IRQ to PCI VGA
Palette Snooping
PCI IDE BusMaster
OffBoard PCI/ISA IDE Card
IRQ3
IRQ4
IRQ5
IRQ7
IRQ9
IRQ10
IRQ11
IRQ14
IRQ15
DMA Channel 0
DMA Channel 1
DMA Channel 3
DMA Channel 5
DMA Channel 6
DMA Channel 7
Reserved Memory Size
Engineer mode
• Clear NVRAM
This item for clearing NVRAM during system boot.
• Plug & Play O/S
This item lets the BIOS configure all the devices in the system or lets the operating system
configure plug and play (PnP) devices not required for boot if your system has a Plug and Play
operating system.
• PCI Latency Timer
This item sets value in units of PCI clocks for PCI device latency timer register.
• IRQ3/4/5/7/9/10/11/14/15
Allows to you assigns IRQ 3,4,5,7,9,10,11,12,14,15 to the first PCI slot.
• DMA Channel 0/1/3/5/6/7
Available: Specified DMA is available to be used by PCI/PnP devices.
Reserved: Specified DMA is reserved for use by Legacy ISA devices.
• Reserved Memory Size
Allows you to select size of memory block to reserve for legacy ISA devices.
• Engineer mode
Engineer mode control.
BIOS SETUP UTILITY
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
[No]
[No]
[64]
[Yes]
[Disabled]
[Enabled]
[Auto]
[Available]
[Available]
[Available]
[Available]
[Available]
[Available]
[Available]
[Available]
[Available]
[Available]
[Available]
[Available]
[Available]
[Available]
[Available]
[Disabled]
[Disabled]
- 2 -
User's Manual
Clear NVRAM during
System Boot.
←
Select Screen
Select Item
↑ ↓
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit