Operating Sequence - Electrolux EW813F Installation And Instruction Manual

i

Operating sequence

Before washing your first load of laundry, we
recommend that you run a cotton cycle at 60°C,
the machine empty, in order to remove any
manufacturing residue from the drum and tub.
Pour half a measure of detergent into the main wash
compartment and start up the machine.
1. Place the laundry in the drum
Open the door.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
2. Measure out the detergent
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent recommended by
the manufacturer in a graduated cup and pour it into
the main wash compartment
out a prewash, pour detergent into the appropriate
compartment marked
3. Measure out the additives
If required, pour fabric softener into the compartment
marked without exceeding the «MAX» mark.
4. Select the desired option(s)
5. Select the temperature
Turn the selector dial to the required temperature
setting.
6. Select the programme and start it
Turn the programme selector dial clockwise to the
required wash programme and press the start/stop
button : the operating pilot light comes on and the
machine starts to operate.
66
with
. If you wish to carry
.
P0876
P0917
P0877
P0880
P0033