Table of Contents
Advertisement
What to do if ...
Problem
The cooking zones are not
working
The oven does not heat
"F2" appears in the display The meat probe plug is not
The oven light does not
come on
If you are unable to remedy the problem by following the above
suggestions, please contact your dealer or the Customer Care De-
partment.
1
Warning! Repairs to the appliance are only to be carried out by quali-
fied service engineers. Considerable danger to the user may result from
improper repairs.
3
If the appliance has been wrongly operated, the visit from the customer
service technician or dealer may not take place free of charge, even
during the warranty period.
3
Advice on cookers with metal fronts:
Because of the cold surface at the front of the cooker, opening the
oven door during (or just after) baking or roasting may cause the glass
to steam up.
Possible cause
Consult the instruction manual for the built-in range
The oven has not been
switched on
The required settings have
not been made
The domestic electrical
protection device (fuse)
has been tripped
fitted properly into the
socket
The bulb has blown
Remedy
Switch the oven on
Check the settings
Check the fuses or protec-
tion devices.
If these are tripped repeat-
edly, you should call a
qualified electrician.
Insert the meat probe plug
as far as it will go into the
socket on the side wall of
the oven.
Replace the bulb
49
Advertisement
Table of Contents
