Electrolux E1000-5 User Manual page 24

24
Cleaning and Care
Putting the door glass back
1. From above insert the door glass at an angle
into the door profile at the bottom edge of the
door and lower it.
2. Take hold of the door trim (B) at each side, posi-
tion it on the inside edge of the door and plug
the door trim(B) into the upper edge of the
door.
On the open side of the door trim (B) there is a
guide bar (C). This must be pushed between the
outer door panel and the guide corner(D).
The clip seal (E) must be snapped in.