Operating Sequence - Electrolux EW1232I Instruction Booklet

Operating sequence

Before washing your first load of laundry, we
recommend that you run a cotton cycle at 60°C, with
the machine empty, in order to remove any
manufacturing residue from the drum and tub.
Pour half a measure of detergent into the main wash
compartment and start up the machine.
1. Place the laundry in the drum
Open the door.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
P0004
2. Measure out the detergent
Pull out the dispenser drawer until it stops. Measure
out the amount of detergent recommended by the
manufacturer in a graduated cup and pour it into the
main wash compartment
If you wish to carry out the prewash, pour detergent
into the appropriate compartment marked
3. Measure out the additive
If required, pour fabric softener into the compartment
marked , without exceeding the «MAX» mark.
P0006
.
.
P0005
4. Switch the machine on
To switch the machine on, press the ON/OFF button
: the mains-on light comes on.
5. Select the desired programme
Turn the programme selector dial to the desired
position: the lights corresponding to the different
phases making up the selected programme light on.
X
95º
E
60º
30º
60º
40º
E
30º 40º
40º 30º
6. Select the spin speed or option
Depress the spin speed button
required speed or option
comes on.
44
E
40º
30º
to choose the
: the corresponding light