Control Panel; Before Use; Using The Freezer; To Start The Freezer And Set The Correct Temperature - Electrolux EU7119C Instruction Book

Control Panel

A
A. Thermometer
Displays the warmest temperature inside the freezer.
B. Red warning lamp
Flashes when one of the alarms in the cabinet has
been triggered.
C. Alarm shut-off button
Used to turn the audible alarm off.
D. Yellow indicator lamp
Lights when fast Freeze is operating.

Before use

Position and clean the cabinet as explained in the
section "Installation".
Before inserting the power plug into the
outlet and switching on the cabinet for
the first time, leave it standing upright
for about 30 minutes, or for 4 hours if it
was transported horizontally. Otherwise
the compressor may sustain damage.
This time will allow the oil sufficient
time to return to the compressor.

Using the freezer

To start the freezer and set the
correct temperature
Turn the thermostat control to the desired position.
MIN
The lowest position of the thermostat control results
in the highest temperature inside the cabinet.
MAX
The highest position of the thermostat control results
in the lowest temperature inside the cabinet.
H :
Switched off.
Allow the cabinet to run for a period of 24 hours
whenever the temperature setting is changed. This
will allow the temperature to stabilise inside the
cabinet.

Switching off

Turn the control anti-clockwise past the click
position to "H".
Unplug the power supply plug from the wall socket
or, alternatively, remove the fuse.
B C D E F G
E. FAST FREEZE button
Used to switch the fast Freeze feature on and off.
F. Green indicator lamp
Lights when the freezer is operating.
G. Thermostat control
Use to switch on and set the desired temperature in
the freezer.
5
GB
GB
Electrolux 818 16 17-03/9