Rear Panel Connections - Harman Kardon HD 755 Owner's Manual

Rear-Panel Connections
£
™ ¢ ¡
¡
Digital Output
™
Audio Outputs
¡ Digital Output: Connect this jack to the
coaxial digital input of an external digital-to-
analog converter for direct access to the digital
signals of the HD 755. DO NOT connect this jack
to the standard audio inputs of any device.
™ Audio Outputs: Connect these jacks to the
CD audio inputs of your receiver, surround
processor or preamplifier.
6 REAR-PANEL CONNECTIONS
£
Remote Control Input
¢
Remote Control Output
£ Remote Control Input:
Connect the output of a remote infrared sensor
or the remote control output of another compati-
ble Harman Kardon product. This will enable the
remote control system to operate even when the
front panel Remote Sensor 3 is blocked. It
will also allow use of the HD 755 with optional,
external control systems.
∞
∞
AC Power Cord
¢ Remote Control Output: Connect this
jack to the input of another compatible Harman
Kardon remote controlled device to have the
remote sensor on the HD 755 provide signals to
other products.
∞ AC Power Cord: Connect this plug to an
AC outlet. If the outlet is switch controlled, make
certain that the switch is in the ON position.