Instructions For The Installer; Technical Specifications; Installing The Appliance; Transportation, Unpacking - Electrolux ER 6641 T Instruction Book

Ins
Ins

Technical Specifications

Model
Gross capacity (l)
Net capacity (l)
Width (mm)
Height (mm)
Depth (mm)
Energy consumption (kWh/day)
(kWh/year)
Energy class, according to EU Standards
Rated power (W)
Weight (kg)

Installing the appliance

Transportation, unpacking

The appliance and the interior fitting are protected for
transport.
Remove all packaging and any adhesive tape.
Any remnants of adhesive can be removed using
white spirit.
After transportation the appliance must not be
switched on for 2 hours. This is to allow the
refrigerant to settle.

Cleaning

Clean the accessories and the inside of the appliance
with warm water and bicarbonate of soda (5 ml
to 0.5 litres of water). Rinse and dry thoroughly.
Do not use detergents, abrasive powders, highly
perfumed cleaning products, wax polishes or
cleaning products containing bleach or alcohol.
tr uctions f
tr uctions f
ER 6641 T
Fresh food com.: 159
Fresh food com.: 148
or the Ins
or the Ins
550
850
600
0.53
193
B
100
34

Location

The appliance should be positioned in a well
ventilated, dry room.
Energy use is affected by the ambient temperature.
The appliance should therefore:
not be installed next to radiators, cookers or
other sources of heat
only be installed at a location where the ambient
temperature corresponds to the climate
classification, for which the appliance is
designed.
The climate classification can be found on the
serial plate.
The following table shows which ambient
temperature
classification:
Climate Classification Ambient Temperature
SN
t aller
t aller
is correct for
+10 to +32 °C
N +16 to +32 °C
ST +18 to +38 °C
each climate
11