Parking Brake Adjustment - Yamaha Raptor YFM350S Ower's Manual

EBU14711

Parking brake adjustment

Parking brake adjustment may be required if
the parking brake does not hold properly. The
cable length A should be adjusted to 64–
68 mm (2.52–2.68 in).
1. Locknut
A. Cable length
2. Adjusting bolt
1. Release the parking brake by moving the
parking brake lever to the right.
2. Fully loosen the locknut and the adjusting
bolt at the rear brake caliper.
3. Loosen the locknut on the brake cable.
4. Turn the adjusting nut on the brake cable
in direction a to increase the cable
length or in direction b to decrease the
cable length.
1. Locknut
8-25
2. Adjusting nut