Arming: Protecting Yourself At Home - Gemini GEM-RP8 Operating Manual

Gemini gem-rp8 keypad operating guide
Hide thumbs Also See for GEM-RP8:
Table of Contents

Advertisement

A R M I N G : P R O T E C T I N G Y O U R S E L F AT H O M E
Protecting Yourself While at Home
1
Before arming your system, make sure the green Status light is ON. This indicates that all of your protective zones are
secure. If any zones are open, the corresponding zone number will be lit. Secure those zones before proceeding.
2
Enter your User Code and press
3
Before your exit delay expires, press
allowing free movement throughout the premises. The Zone light of any bypassed zones will flash slowly.
Your system may have been programmed for Automatic Interior Bypass, in which case it will recognize that you have not left
the premises and will automatically bypass any interior zones.
Instant Mode
Pressing
will cancel the Entry delay, activating the "Instant" mode. This is typically done in the evening when all family
F
members are home for the night. Instant Mode can be activated at any time after the system has been armed. The red
Armed light will flash rapidly while in the Instant Mode.
Easy Exit (optional)
Your System may have been programmed to allow Easy Exit, which allows a user to exit the premises with the system
armed. By pressing
This will allow, for example, an early morning commuter to exit the house in the morning, without having to disarm and rearm
the system, waking the family.
Arming with a System Trouble Present (TROUBLE
If the GEM-P800 has a system trouble present, TROUBLE H will be lit and the keypad sounder pulsing. If you cannot
immediately clear the trouble, the system can still be armed. Simply press
Press
to view any other troubles, and exit the TROUBLE mode when done. Enter your User Code and press
E
arm the system. For more information, refer to page 12. Note: System troubles should be repaired as soon as possible.
6
D.
The green Status light will go out, and the red Armed light will light.
to bypass any interior zones, deactivating devices such as motion sensors, and
B
followed by
A
0
, the protection is removed from the Exit/ Entry zone for 3 minutes.
is lit)
H
followed by
A
4
to view the trouble.
D
to

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents