Keypad Controls & Indicators - Gemini GEM-RP8 Operating Manual

Fire Alarm Light I will flash and the Keypad
sounder will beep when system is in a Fire Alarm
Condition (See Silencing a fire Alarm, Page 8)
Trouble Light H will light and the Keypad
sounder will pulse to indicate that a system
trouble is present.
(See System troubles, Page 12)
Status Light will light when all zones are secure
and system is ready to be Armed.
Armed Light will light when system is Armed,
and will flash when system is in Alarm
Press followed by the corresponding
A
Function number to enable special functions and
options. (See Special Functions, Page 11)
To Bypass a zone, press
number to be bypassed, and then Arm system.
Press to reset Fire Zone, clear miss-
C
entered codes, reset Alarm Memory, etc.
4
K E Y P AD C O N T R O L S & I N D I C AT O R S
and the zone
B
Zone Lights (1 through 8) will light to indicate
that the corresponding Zone is open, and will
flash to indicate a zone in alarm.
G E M I N I
I
1 2
H
A 1 2 3
B 4 5 6
C 7 8 9
C O M P U TE R I Z E D S E C U R IT Y S Y S T E M
Numerical
Emergency Keys Press simultaneously
Keys 1-9, 0.
to signal an emergency condition.
Used to
Press
enter User
8
Codes, Zone
numbers,
9
etc.
(Programmable)
AC Light will light to indicate
that AC Power is present.
3 4 5 6 7 8
J
E
F
G
0
+ for Fire Emergency,
7 G
+ for Auxiliary Emergency or
G
+ for Police Emergency.
G
Press
E
to bypass all
interior
protective
devices such
as motion
sensors, etc.
D
Press
after entering
User Code
when Arming
or Disarming
System.
Press
to
F
remove entry
delay from
the Exit/
Entry door.