Electrolux EWN 820 Instruction Booklet page 10

- depress RESET once or repeatedly to cancel the
previously performed programme (all the phase
indicator lights must be off);
- select the type of fabric by means of the relevant
button;
- select the special programme:
• RINSES AND SPIN
Depress RESET once, the pilot light
(PREWASH/WASH) goes out.
• SPIN
Depress RESET twice, the pilot lights
(PREWASH/WASH) and RINSES
•DRAIN
Depress RESET three times, the pilot lights
/ (PREWASH/WASH), RINSES
SPIN go out and
Example:
/
• If the machine is switched off:
- depress ON/OFF button
- select the type of fabric by means of the relevant
button:
- select the special programme as previously
described.
/
/
go out.
and
goes on.
In this case the
machine will perform
the rinses and spin.
to switch it on;
10 Programme phase indicator lights
When you select a programme, the lights relevant to
the phases that form the programme light up.
After you have started the programme, only the light
relevant to the phase that is currently being carried
out will remain lit.
At the end of the programme the pilot light
illuminates.
The END light flashes in the event of operating
problems:
1 flash = the machine does not fill
2 flashes = the machine does not empty
4 flashes = the door has not been closed
To eliminate the problem, see paragraph
"Something not working".
10