Mounting The Integral Modem (Er) - Honeywell Mercury User Manual

Mounting the Integral Modem (ER)

Before Installation
Figure 4
1. Start the ER-Link Software package and select Instrument,
then select Shutdown. After the link is disconnected
escape to clear the dialog box and select Disconnect Link.
2.
When Shutdown is complete, reach inside the instrument and
unplug the main battery plug.
3.
Remove the battery mounting plate by loosening the (4) screws
and lift the battery plate up and out.
4.
Remove the screws from the (4) corners of the ER main board.
After Installation
Mercury Modem with
Main Batteries not
shown for clarity
Page 15
15