Table of Contents
Advertisement
Utility Setup
4-7. BIOS Flashing Utility
You may update the newest Siluro GF4 Ti4400/Ti4600 drivers or BIOS files from
your dealer or directly download from our WEB site at http://www.abit.com.tw.
Note: When you use the flash utility to flash the BIOS, the screen will be blank for
about 10 seconds. This is a normal situation, not a malfunction. Do not reboot your
computer during this period, or you may cause the flash to fail.
1.
Reboot your computer into DOS environment, or open a Windows
window to the DOS prompt.
2.
Insert the Installation CD into your CD-ROM drive.
3.
Copy CWSDPMI.EXE and NVFLASH.EXE to a new directory from path
D:\NVFLASH. (D: refers to the CD-ROM drive letter)
4.
Copy the new BIOS binary file to the new directory.
5.
Change to the new directory and type the following command:
NVFLASH –F [Filename]. ([Filename] refers to the name of BIOS binary
file.)
Then press the "Enter" key. The program will begin flashing your display
card BIOS.
6.
When the flash is complete (the screen will display images again), you must
reboot your computer system to make flash take effect.
4-35
®
95/98
User's Manual
Advertisement
Table of Contents
