Table of Contents
Advertisement
Hardware Setup
Chapter 2.
2-1. Card Installation
This graphics card can only be installed in a motherboard with AGP slot. Please
handle this card with care and make sure to unplug the power supply of your system
before installation.
New Systems:
1.
Unplug all power cords of your computer.
2.
Remove computer chassis cover.
3.
Locate the AGP slot on your motherboard.
4.
Remove the metal bracket corresponding to the AGP slot. Keep the screw.
5.
Align this card to the AGP slot. Hold the card's edges and insert it into the
slot without using excessive force or pressing any components on the card.
Make sure it is firmly and completely fixed into the slot.
6.
Secure this card's mounting bracket to the back panel of computer chassis
with the screw removed from the metal bracket.
7.
Replace the chassis cover.
8.
Connect PC monitor or other display devices to this card.
9.
You are now ready to install the software drivers and utilities.
Systems with Existing VGA Card:
1.
Change the display driver to Standard VGA.
2.
Shut down your computer and unplug all power cords.
3.
Replace the existing VGA card with this new card.
4.
Restart your computer.
5.
Install the software drivers.
Hardware Setup
2-1
User's Manual
Advertisement
Table of Contents
