Related Manuals for Electrolux ESL 6370RO
Summary of Contents for Electrolux ESL 6370RO
- Page 1 ..................... ESL 6370RO EN DISHWASHER USER MANUAL...
-
Page 2: Table Of Contents
www.electrolux.com CONTENTS 1. SAFETY INFORMATION ........... 3 2. -
Page 3: Safety Information
ENGLISH SAFETY INFORMATION Before the installation and use of the ap- • The water inlet hose has a safety valve pliance, carefully read the supplied in- and a sheath with an inner mains cable. structions. The manufacturer is not re- sponsible if an incorrect installation and use causes injuries and damages. - Page 4 www.electrolux.com • Do not remove the dishes from the ap- 1.3 Use pliance until the programme is comple- • This appliance is intended to be used in ted. There can be detergent on the household and similar applications such dishes. WARNING! –...
-
Page 5: Product Description
ENGLISH 2. PRODUCT DESCRIPTION Upper spray arm • When the programme starts to operate, the red light comes on and stays on for Lower spray arm all the duration of the programme. Filters • When the programme is completed, the Rating plate green light comes on. -
Page 6: Programmes
www.electrolux.com On/off button Indicators Programme buttons Function buttons Delay button Indicators Description 3 hours indicator. 6 hours indicator. Multitab indicator. Salt indicator. It is always off while the programme operates. Rinse aid indicator. It is always off while the programme operates. End indicator. -
Page 7: Options
ENGLISH 5) Use this programme to quickly rinse the dishes. This prevents the remaining food to bond on the dishes and bad odours to come out from the appliance. Do not use detergent with this programme. Information for test institutes For all the necessary information for test performance. -
Page 8: Before First Use
www.electrolux.com follow the procedure from step (1) to • The end indicator comes on. step (2). 3. Press button (4), the end indicator 2. Press button (4). goes off. The acoustic signal for the end of programme is deactivated. • The indicators of buttons (2) and (3) go off. -
Page 9: Manual Adjustment
ENGLISH Manual adjustment Turn the water hardness dial to the posi- tion 1 or 2. 6.2 Acoustic signals • The end indicator is off. 5. Press button (4), the end indicator The acoustic signals operate when the comes on. The acoustic signal for the appliance has a malfunction or when the end of programme is activated. -
Page 10: Daily Use
10 www.electrolux.com 6.3 Filling the salt container Turn the cap counterclockwise and open the salt container. Put 1 litre of water in the salt contain- er (only for the first time). Fill the salt container with dishwasher salt. Remove the salt around the opening of the salt container. -
Page 11: Cancelling The Programme
ENGLISH 7.1 Using the detergent Press the release button (B) to open the lid (C). Put the detergent in the compartment (A) . If the programme has a prewash phase, put a small quantity of deter- gent on the inner part of the appli- ance door. -
Page 12: Hints And Tips
12 www.electrolux.com • Let the dishes become cold be- fore you remove them from the appliance. Hot dishes can be easily damaged. • First remove the items from the lower basket, then from the up- per basket. • There can be water on the sides and on the door of the appliance. -
Page 13: Care And Cleaning
ENGLISH • The filters are clean and correctly instal- • The correct quantity of detergent is led. used. • The spray arms are not clogged. • There is dishwasher salt and rinse aid (unless you use combi detergent tab- • The position of the items in the baskets lets). -
Page 14: Troubleshooting
14 www.electrolux.com Assemble the filter (A) and put it into position in filter (B). Turn it clockwise until it locks. An incorrect position of the filters can cause bad washing results and damage to the appliance. Only use neutral detergents. Do not use 9.2 Cleaning the spray arms abrasive products, abrasive cleaning pads Do not remove the spray arms. - Page 15 ENGLISH Problem Possible solution You cannot activate the appli- Make sure that the mains plug is connected ance. to the mains socket. Make sure that there is not a damaged fuse in the fuse box. The programme does not start. Make sure that the appliance door is closed.
-
Page 16: Technical Information
16 www.electrolux.com 2. Press and hold, at the same time, but- • The end indicator is off. tons (3) and (4) for a few seconds to 5. Press button (3), the end indicator make sure that the appliance is in set- comes on. - Page 17 ENGLISH...
- Page 18 18 www.electrolux.com...
- Page 19 ENGLISH...
- Page 20 www.electrolux.com/shop...