Extra Rinse Button; Quick Wash Button; Delay Start Button - Electrolux EW 1065 F Instruction Booklet

EW 1465 F
• Cotton, linen:
500/700/1000 max 1400 r.p.m.
• Synthetics, wool:
500/700 max 1000 r.p.m.
• Delicates:
500 max 700 r.p.m.
No spin
By selecting this option the spinning phases are
suppressed.
This function is not available for cotton and linen.
To be selected for extremely delicate items.

7 Quick wash button

By pressing this button the washing time is reduced
as follows:
• 34 minutes for cotton 95°C
• 52 minutes for cotton 60°C to COLD
• 24 minutes for synthetics
• 14 minutes for delicates
This option is not available with the wool programme
and the Energy saving programme.
To be used for lightly soiled laundry.
The Quick Wash function cannot be selected
together with the INTENSIVE option
8 Intensive button
For heavy soiled laundry.
The washing time is prolonged by approximately
15 minutes for cotton and 10 minutes for synthetics.
This function cannot be selected together with the
QUICK WASH option and the Energy saving
programme.
9 Anti-crease button
When this button is pressed, the last rinse water is
not emptied out, to prevent the fabrics from creasing.
When the programme has finished, the pilot light of
the START/PAUSE button flashes to indicate that
the water must be emptied out.
To empty out water there are 3 possibilities:
• Select programme "D" (draining):
The water is emptied out without spinning.
Attention! Before selecting programme "D" the
selector dial has to be positioned on O (cancelling).
• Depress START/PAUSE button
emptying, the machine performs the spin cycle
corresponding to the type of fabric previously
selected.
• Select the spin speed by means of the relevant
button and then depress the START/PAUSE
button.

10 Extra rinse button

Can be used with all programmes except the wool
programme. The machine performs 4 rinses instead
of 3.
This option is recommended for people who are
allergic to detergents and in areas where the water is
very soft.

11 DELAY START button

The wash programme can be delayed from 1 hour
up to a maximum of 24 hours by means of this
button.
.
• Switch the machine on by depressing the ON/OFF
button
• Select the programme and the required options.
• Select the delay start.
• Depress START/PAUSE button
starts its hourly countdown.
The programme will start after the selected delay has
expired.
• Depress START/PAUSE button
• Depress DELAY START button until the required
time is displayed.
If you wish to cancel the delay, depress the button
only once: the symbol 0 h is displayed.
• Depress START/PAUSE button again.
35
Selecting the delayed start
.
Altering the delayed start
: after
: the machine
.