Communication Setup; Selecting The Connection Method; Changing The Communications Settings - Pioneer BDP-430 Operating Instructions Manual

Settings
DivX Register
Displays the registration code of your player.
DivX Deactivate
Deactivate your player and display the deactivation code.
NOTE
• ABOUT DIVX VIDEO-ON-DEMAND:
This DivX Certified® device must be registered in order to
play purchased DivX Video-on-Demand (VOD) movies. To
obtain your registration code, locate the DivX VOD section
in your device setup menu. Go to vod.divx.com for more
information on how to complete your registration.
• To play copyright-protected DivX files, connect the HDMI
OUT terminal to the TV.
• When "HDMI" is selected from the "Video Out Select"
menu, video signals are not output from the VIDEO
OUTPUT or COMPONENT VIDEO OUTPUT terminals.
• When "Component" is selected from the "Video Out
Select" menu, file playback may stop. If this happens, set
"Component Video Out" to "576/480i" or "576/480p".

Communication Setup

By connecting to the Internet, you can enjoy BD-LIVE
functions as well as update this Player's software. This
section describes the procedure for making network
settings. You can connect to the Internet either by
using a LAN cable or by connecting a USB Wireless
LAN Adaptor to one of the USB ports.
NOTE
• Check that LAN cable or USB Wireless LAN Adaptor is
properly connected (page 11).
• When USB Wireless LAN Adaptors are connected to both
the USB ports on the player's front and rear panels, the
USB Wireless LAN Adaptor last connected is used.
• Check the following information about the wireless LAN
access point beforehand:
− Type of encryption and encryption key
− SSID (network name)
• For manually performing the setting, the following
information of the connected router or modem is required.
Confirm the information prior to the setting.
− IP address, netmask, gateway, DNS IP address
• This player cannot be connected to a network when a
proxy server is used.
22

Selecting the connection method

1
Press HOME MENU to display the HOME
MENU screen.
2  to select "Settings", then press
Press
ENTER.
 to select "Communication Setup",
3
Press
then press ENTER.
4  to select "Cable/Wireless Select",
Press
then press ENTER.
 to select the connection type, then
5
Press
press ENTER.
• Cable: Select this to connect to the network using a
LAN cable.
• Wireless: Select this to connect to the network using a
USB Wireless LAN Adaptor.
Changing the communications
settings
1
Press HOME MENU to display the HOME
MENU screen.
 to select "Settings", then press
2
Press
ENTER.
3  to select "Communication Setup",
Press
then press ENTER.
4  to select the connection method you
Press
want to set, then press ENTER.
• Ethernet Setup(Cable): Change the settings for
connecting to the network using a LAN cable.
• Ethernet Setup(Wireless): Change the settings for
connecting to the network using a USB Wireless LAN
Adaptor.
5  to select "Change", then press
Press
ENTER.
Current Ethernet setup info.
IP Address : Auto Setup
Netmask : Auto Setup
Gateway : Auto Setup
DNS : Auto Setup
Change
Initialize
• For initializing the current setting, select "Initialize",
then press ENTER.
• When "Ethernet Setup(Cable)" was selected at step 4,
proceed to step 10.
6  to select the access point, then
Press
press ENTER.
 to set the type of encryption, then
7
Press
press ENTER.
• When "OPEN" is selected, proceed to step 9.
• When "WEP", "WPA" or "WPA2" is selected, input
the encryption key. Select "security key", then press
ENTER. For instructions on inputting characters, see
page 23.
 to select "Next", then press
8
Press
ENTER.
9
Press ENTER to test the connection.
10  to select
For setting the IP address, press
"Yes" or "No", then press ENTER.
Do you obtain the IP address
automatically?
Yes No
IP Address
Netmask
Gateway
Next
• If selecting "Yes": The IP address is automatically
obtained.
• If selecting "No": The IP address, netmask, gateway
and primary and secondary DNS IP addresses are
manually entered using the screen for inputting
characters. (Page 23)
 to select "Next", then press ENTER.
11
Press
12
For testing the connection to the internet, after
confirming the settings, press  to select
"Test", then press ENTER.
• "Test" is available only when setting to obtain the IP
address automatically. "Test" cannot be selected if the
IP address has not been obtained automatically.
Confirm the current setting.
IP Address : xxx xxx xxx xxx
Netmask : xxx xxx xxx xxx
Gateway : xxx xxx xxx xxx
DNS Address : xxx xxx xxx xxx
MAC Address : xx:xx:xx:xx:xx:xx
Complete
Test
• As a result of the test, if the internet connection fails,
enter the setup values manually.
13  to select "Complete", then press
Press
ENTER.