Load Fail-Safe Defaults; Load Optimized Defaults; Set Password; Save & Exit Setup - Abit NF-M2 NVIEW User Manual

In the situation when the temperature of "SYS FanEQ Reference Temp." detected is higher than
the value of item "SYS FanEQ Target Temp." plus the value of item "SYS FanEQ Temp.
Tolerance", the speed ratio for the 3-pin fan assembly connected at "SYSFAN1" fan power
connector will first run at the speed ratio set by the item "SYS FanEQ Start Control", and then
up to 100%.
All Voltages, Fans Speed and Thermal Monitoring
These unchangeable items list the current status of the CPU and environment temperatures, fan
speeds, and system power voltage.

3.9 Load Fail-Safe Defaults

This option loads the BIOS default values for the most stable, minimal-performance system
operations.

3.10 Load Optimized Defaults

This option loads the BIOS default values that are factory settings for optimal-performance
system operations.

3.11 Set Password

This option protects the BIOS configuration or restricts access to the computer itself.
3.12 Save & Exit Setup
This option saves your selections and exits the BIOS setup menu.

3.13 Exit Without Saving

This option exits the BIOS setup menu without saving any changes.
NF-M2 nView 3-23