Hardware Setup
•
HLED (Pin 1, 3):
Connects to the HDD LED cable of chassis
front panel.
•
RST (Pin 5, 7):
Connects to the Reset Switch cable of
chassis front panel.
•
SPK (Pin 15, 17, 19, 21):
Connects to the System Speaker cable of
chassis.
•
SLED (Pin 2, 4):
Connects to the Suspend LED cable (if there is one) of chassis front panel.
•
PWR-ON (Pin 6, 8):
Connects to the Power Switch cable of chassis front panel.
•
PLED (Pin 16, 18, 20):
Connects to the Power LED cable of chassis front panel.
2-13
User's Manual