Appendix C. Usb 2.0 Drivers Installation For Windows - Abit NV7-133R User Manual

USB 2.0 Drivers Installation for Windows
Appendix C. USB 2.0 Drivers Installation for
This motherboard had built-in the USB 2.0 functions, can let you support the new generation USB 2.0
specification devices. The following description will tell you how to install the USB 2.0 drivers.
Step 1: Check the "Device Manager" to see that
the USB controller device is not properly
installed. Click on it then click the mouse right
key. Choose the "Properties" then click the
mouse left key to go on next step.
Please insert the nForce series CD into your
CD-ROM drive. It should execute the program
automatically. If not, you can go to the CD
location and execute the execution file from the
main directory of the CD. After it is executed,
you will see the screen shot below.
®
2000
®
Windows 2000
Step 2: Choose "USB 2.0 Driver" and click on it.
You will go to the next screen.
Step 3: The USB 2.0 driver setup InstallShield
wizard shows up, and it will go to the next screen
for a while.
C-1
®
User's Manual