Abit VA-11 User Manual page 36

3-10 Chapter 3
DRAM Command Rate:
The options are [2T], and [1T].
Write Recovery time:
The options are [2T] and [3T].
AGP & P2P Bridge Control:
Click <Enter> key to enter its submenu:
AGP Aperture Size
This option specifies the amount of system memory that can be used by the AGP
device. The aperture is a portion of the PCI memory address range dedicated for
graphics memory address space.
AGP Mode
This item selects the data transfer rate of AGP device. A higher rate delivers faster
and better graphics to your system. Make sure your graphics card supports the mode
you select.
AGP Driving Control
Leave this item to its default setting. Set this item to [Manual] only if there are
compatibility problems with some AGP cards.
VA-10/VA-11