Door Locked Pilot Light; Use; Control Panel - Zanussi ZKG 2120 User Manual

Use

Control panel

ZKG 2100
1 ON/OFF button (MARCHA PARADA)
Press this button to switch the washing machine on.
The display (10) will show three blinking dashes or a
blinking zero. You will find more detailed
explanations on pages 38-39 (see "DISPLAY").
Press the ON/OFF button again to switzch the
machine off.
2 MAINS-ON light
This light is connected to the ON/OFF button. It lights
up when you press the button, and goes out when
you press it again.
3 FABRIC button (TEIJDOS)
Press this button repeatedly to select the programme
on the basis of the type of laundry to be washed. The
light relevant to the selected programme will light up.
The machine will propose a temperature and
automatically select the maximum spin value
provided for the programme you have chosen. You
can change these values by operating buttons 4 and
5.
Handwash (Lavado a mano)
When you select this programme, you obtain a
particularly delicate washing, suitable for articles of
clothing whose label indicates that they must be
hand-washed .
4 TEMPERATURE button (TEMPERATURA)
Press this button repeatedly to increase or decrease
the temperature, if you want your laundry to be
washed at a temperature different from the one
proposed by the machine. The relevant light will light
up.
Maximum temperatures are 90°C for cotton, 60°C for
synthetic fabrics, 40°C for delicate fabrics, wool and
fabrics to be hand-washed (HANDWASH programme).
By selecting position FRIO the machine will wash with
cold water. To be used for extremely delicate items,
such as curtains.
5 SPIN SPEED button (CENTRIFUGADO)
Press this button repeatedly to change the spin
speed, if you want your laundry to be spun at a
speed different from the one proposed by the
machine. The relevant light will light up.
Maximum speeds are:
• for cotton: 1,000 rpm (ZKG 2100) or
1,200 rpm (ZKG 2120);
• for synthetic fabrics, wool, and fabrics to be hand-
washed: 900 rpm;
• for delicate fabrics: 700 rpm.
RINSE HOLD (AGUA EN LA CUBA) position :
when you choose this option, the machine will not
drain the water of the last rinse, so as not to wrinkle
the laundry.
At the end of the cycle, the START/PAUSE button
light goes off, the RINSE HOLD light remains lit to
indicate that the water must be drained and a
flashing zero will appears in the display. The DOOR
LOCKED light remains lit.
To complete the cycle, press the RESET (ANUL.)
button once, so as to cause all the lights to go off,
the display will show three blinking dashes. Then
select a washing programme by means of the
FABRIC (TEJIDOS) button.
If you wish to drain and spin press the RESET
(ANUL.) button in order to select the position
desired.
37