Using The Automatic Warm-Up Function; Locking/Unlocking The Control Panel - Electrolux EHD 6676 P Installation And Operating Instructions Manual

Using the automatic warm-up function

All cooking zones are equipped with an automatic
warm-up function. The automatic warm-up function
sets the cooking zone to the highest setting for a
certain period of time and then automatically switch-
es back to the cooking setting that was originally set.
Step Control panel
1.
Setting the maximum setting
2.
Place to one side for a moment
3. touch
4. touch in order to set the desired cooking setting
3
If during the automatic warm up
heat setting is selected, e.g. from
automatic warm up is adjusted.
The length of time that the automatic warm up func-
tion operates depends on the heat setting selected.
Heat Length of the automatic warm up
setting Radiation element
[min:sec]
v
1
2
3
4
5
6
7
8
9

Locking/unlocking the control panel

The control panel, with the exception of the "On/Off"
sensor field, can be locked at any time in order to
prevent the settings being changed e.g. by wiping
over the panel with a cloth.
Control panel
Switch on Touch
Switch off Touch
3
When you switch the appliance off, the locking
function is automatically switched off.
8
a higher
to , the
0:30
1:00
1:40
4:50
6:30
10:10
2:30
3:30
4:30
---
Display
/
/
until /
after 3 seconds
Length of the automatic warm up
Induction
[min:sec]
10:10
Display
(for 3 seconds)
previously set heat setting
0:10
0:10
0:10
3:10
5:50
2:00
2:30
2:50
---