Table of Contents
Advertisement
2
Select
next to Wi-Fi to activate the WLAN feature.
The device will start searching and display the list of
WLAN APs.
3
Select the check box next to an AP.
The device will attempt to connect to the WLAN.
4
Enter a password and select
›
Create a new WLAN connection
1
From the Start menu, select
Wi-Fi.
→
2
Menu
Add New.
Select
→
3
Enter network parameters and a network name and
select Next.
4
Configure settings for network authentication and
data encryption and select Finish or Next, depending
on the authentication type.
If you selected Next, continue with the next step.
OK (if necessary).
Settings
Connections
→
5
Set the IEEE 802.1x access option and the extensible
authentication protocol (EAP) type (if necessary) and
select Finish.
The new WLAN network will appear on the screen.
›
Customise the WLAN settings
1
From the Start menu, select
Wi-Fi.
→
2
Menu
Configuration.
Select
→
3
Adjust the following settings:
Option
Turn on available
network
notification
Turn off Wi-Fi if
not connected in
Settings
Connections
→
Function
Set the device to alert you to
available WLANs.
Set the WLAN feature to
automatically turn off after a
spcified length of time.
Connectivity
79
Advertisement
Table of Contents
