Table of Contents
Advertisement
What to do if ...
Problem
The cooking zones are not
working
The oven is not heating up The oven has not been
The oven lighting is not
operating
F11 appears in the clock
display
An error code not listed
above appears in the time
display
If you are unable to remedy the problem by following the above
suggestions, please contact your dealer or the Customer Care De-
partment.
Possible cause
Consult the instruction manual for the built-in range
switched on
The clock has not been set
The required settings have
not been set
The ovenís safety cut-out has
been triggered
The house wiring fuse (in the
fuse box) has tripped
The oven light bulb is faulty
The meat probe has short
circuited or the plug of the
meat probe is not firmly in
position in the socket
Fault in the electronics
Remedy
Switch on the oven
Set the clock to the cur-
rent time
Check the settings
See Oven Safety Cut-out
Check fuse If the fuses
trip several times, please
call a qualified electrician
Replace oven bulb
Insert the plug of the
meat probe as far as it will
go into the socket on the
side wall of the oven
Switch off the appliance
via the house fuse or the
safety switch in the fuse
box and switch it on again
If displayed again, please
contact your local Service
Force Centre
57
Advertisement
Table of Contents
