Outgoing Messages - Motorola TIMEPORT User Manual

iTAP Software
Availability depends on your subscription to these services.
To turn iTAP software on, select
menu and press O. Select
press O. Use the ª key to select iTAP software, and
press O.

Outgoing Messages

i Press E. Select the Quick Access feature or, after the
tone, say the Voice Tag name.
This option is used to view and manage any outgoing messages.
These messages will be stored on your SIM card. When you select
this option, the total number of messages will be displayed
followed by the first message in the list.
AYou cannot send an outgoing message until the Message
Service Center number has been set. See "Message
Settings" on page 71.
Press the O key, when viewing any message, to enter the
sub-menu. See "How to Read SMS Messages" on page 67 for
more information on navigating through the messages.
Phone Setup from the Options
Entry Method Selection and
Send Message
This option allows you to add the destination phone number
using a sub-menu. Using the scroll keys you can select:
Enter Number—Manually enter the phone number using the
keypad and send the message.
Find Entry by Name—Recall a phone number from the Phone
Book by name and send the message. (See "Find Entry By Name"
on page 53.)
Find Entry by Location—Recall a phone number from the
Phone Book by location and send the message. (See "Find Entry
By Location" on page 54.)
When you have set up a destination phone number, select O
to send the message. The phone displays the "sending a
message" animation until you press O to confirm that you are
Sending Message .
Edit Message
This option allows you to use the Message Editor to edit the
selected message and then to either send the modified message
or store it in your Outgoing Messages list. See "How to Create
and Edit SMS Messages" on page 67 for more information on
using the Message Editor.
Delete Message
This option will delete the currently viewed message.
Using the Options Menu
69