Table of Contents
Advertisement
4.3. Client Utilities Installation
*Please find the utility manually from CD-ROM drive's root directory or
download it from Edimax webiste. If you have any question please check with
Edimax local technical support team.
The Client Installation Program is a wizard driven procedure which will perform
the following tasks:
Install client utilities and drivers into your PC.
z
Automatically add all Network Ports to your PC.
z
The network port driver supports network protocol auto-detection. It will
automatically select an available network protocol (TCP/IP, IPX or NetBEUI) of
the client computer to connect to the print server.
Since both the print server side and client side support multi-protocols, the
configuration process of the client side is fully automatic.
After the installation, perform the standard "Add Printer" procedure and
choose the print server's "Network Port" in the "Available Ports" list. You can
test printing from the PC to the print server as your local printer.
The Client Installation can be performed on Windows 2000/XP/2003/Vista with
the same user interface. Before installation, please confirm that your PC has
already connected to the network and installed at least one network protocol.
Note that the following steps are running in Windows XP, for other Operation
Systems the procedures are similar.
1. Please execute the Client installation software manually.
15
Advertisement
Table of Contents
