Fluke 1743-BASIC User Manual page 33

Power quality logger

Hide thumbs Also See for 1743-BASIC:

Table of Contents

Connect the Logger as follows:

The 1744/1743 Logger is prepared for logging in 3-phase 4-wire

(Wye) systems (P-N), or 3-phase 3-wire (Delta) systems (P-P). Please

note the different types of connection and configuration in the PQ Log

software.

1. Connect all required measuring leads.

2. If you want to supply the Logger from an extra outlet, use the

supplied line power adapter. The power supply leads can also be

connected in parallel to the voltage test leads, but the voltage is

limited to 660 V RMS ac.

3. Connect the current clamp set or Flexi Set to the Logger.

4. Connect the current sensor to the conductor under test.

5. Connect the dolphin clips to the test leads. For 3-phase, 4-wire

systems, connect the N-test lead first, and then the other phases.

Shop for Fluke products online at:

Note

(Delta) or

(Wye) measurements

MyFlukeStore

www.

Power Quality Logger

Using the Logger

1.877.766.5412

.com

Table of Contents

1744 1743