GE Monogram ZDOD240 Owner's Manual page 14

Installation The outdoor/indoor refrigerator can be
a free-standing model or can be built in
dimensions
using the cut-out dimensions below.
Product dimensions:
Height with
canopy: 36" (914 mm)
Height without
canopy: 34
Width: 23
Depth: 23
Top canopy The top canopy may be removed when
installing under a countertop.
removal
The door MUST BE closed when
removing or replacing the top canopy.
To avoid damage, the top canopy must
clear the left hinge center locking plate
and right hinge.
• Remove the 3 screws from the back of
• Using heavy-duty work gloves, lift up
• Lift the top canopy up and off of
NOTE: Keep the top canopy and screws
for future free-standing installations.
NOTE: When installing the unit in a
free-standing configuration, the top
canopy must be left in place.
14
"
23 3 /
4
(603 mm)
36"
(914 mm)
(with top
canopy)
/ " (876 mm)
1
2
/ " (603 mm)
3
4
/ " (603 mm)
3
4
the top canopy (A).
on the top canopy back (B) and slide
it forward until it unlatches from the
unit (C).
the unit.
Built-In Dimensions
When building in the outdoor/indoor
refrigerator, be sure to allow for a full
door swing so you have full access to the
pull-out full extension drawers.
See the Installation Instructions (Pub. No.
31-51542) for complete directions.
"
23 3 /
4
(603 mm)
NOTE: Cut-out dimensions:
Handle and Height: 34
handle standoff Width: 23
/ "
depth is 2 3 Depth: 24" (610 mm)
4
CAUTION:
of the stainless steel canopy top may be
sharp. Wear heavy-duty work gloves when
moving the top.
Outdoor/Indoor Refrigerator
/ " (876 mm) minimum
1
2
/ " (603 mm) minimum
3
4
(B)
NOTE: Door MUST BE
closed before removing or
(A)
replacing the top canopy.
Under side edges
(C)