GE Monogram ZDOD240 Owner's Manual page 10

Glass shelves
Tempered glass shelves in the outdoor/
indoor refrigerator are removable for
easy cleaning or for storing larger items.
To remove a shelf, open the door
completely to avoid potential damage
to the gasket. Lift up on the back of the
shelf slightly. Tilt the shelf to one side
at an angle while pulling forward.
Appearance may vary
QuickSpace ™
This shelf splits in half and slides under
itself for storage of tall items on the shelf
Shelf
below.
Step 1: Lift the back edge of the front half
of the shelf.
Step 2: Pull slightly forward.
Step 3: Lower the back edge of the front
half of the shelf while sliding it underneath
the back half.
The entire Quick Space shelf can be
removed and replaced (see Glass Shelves
section).
10
To remove, lift up on the back
of the shelf
Controls and Features
To replace a shelf, open the door
completely to avoid potential damage
to the gasket. Tilt the shelf to one side
at an angle and slide toward the back wall,
placing one side onto the shelf support.
Place the other side onto the opposite
shelf support. Ensure rear locking tabs
are engaged. When installed properly,
the shelf will not slide forward when
gently pulled.
Tilt the shelf at an angle while
removing or replacing
Outdoor/Indoor Refrigerator
Place in slots when replacing
the shelf
Step 1
Step 2
Step 3