To Originate A Call Using One-Touch Buttons - NEC Dterm I Series User Manual

TO ORIGINATE A CALL USING ONE-TOUCH BUTTONS

NOTE: With DTP-32D
Press desired
•
To program:
•
NOTE: Available only on Dterm stations with speed calling keys.
Press Conf
•
Press desired
•
lights steady.
Enter desired station number, feature code or outside access code and
•
telephone number. Display indicates digits dialed.
Press Conf
•
To verify:
•
Press Conf
•
Press desired
•
Display indicates digits programmed.
•
NOTE: Station numbers programmed to one touch buttons will light when
that station is in use. (This is only available on a 32D Terminals).
One-Touch key, or press
key. Conf key flashes
One-Touch key, Speaker button LED
key again to save the number.
key.
One Touch key.
Speaker key and
- 18-
One-Touch key.