Anytime Usb Charge Utility; Hdmi Port Or Displayport - Fujitsu LIFEBOOK S762 User Manual

Anytime USB Charge Utility

The Anytime USB Charge feature can be disabled and enabled
from the BIOS Setup Utility; the feature is enabled by default.
The settings for the Anytime USB Charge feature can be changed
by going to Start > All Programs > Anytime USB Charge Utility
and clicking on Settings. There are three possible settings for
this feature: "Disable Anytime USB Charge function", "Only
enable Anytime USB Charge function with AC Adapter", and
"Enable Anytime USB Charge function with AC Adapter or
battery". Note that if the setting is selected, the function will
eventually drain the battery if the AC Adapter is not plugged in.
Certain USB devices may require that a driver be installed in
order for this feature to work.
Please check the documentation for your USB device to ensure
proper charging with the Anytime USB Charge utility.

HDMI Port or DisplayPort

Depending upon your system configuration, there is either a
High-Definition Multimedia Interface (HDMI) port or a
DisplayPort connector located on the left side of the system.
This a digital audio/video interface over which uncompressed
streams can be transmitted. HDMI / DisplayPort are used to
connect compatible digital devices with your computer (such as
a big-screen TV, a large monitor, or a projector).
To connect an HDMI or DisplayPort device:
Align the connector with the port opening.
1
Push the connector into the port until it is seated.
2
74 - Device Ports
Figure 33. HDMI Interface