Panasonic PT-DZ770E Operating Instructions Manual page 81

■ [REMOTE CONTROL] ▶
▶
z You can set the limitation on the control from
the remote control.
Enables button operations from the
[ENABLE]
remote control.
Disables button operations from
[DISABLE]
the remote control.
5) Press ▲▼ to select [ENABLE] or
[DISABLE], and press the <ENTER>
button.
6) When the confirmation is displayed,
select [OK] or [CANCEL], and press
the <ENTER> button.
Note
z When a button operation is performed on the device
set to [DISABLE], the [SECURITY PASSWORD]
screen is displayed.
Enter the security password.
z The [SECURITY PASSWORD] screen will
disappear when the <MENU> button is pressed, or
when there is no operation for approximately ten
seconds.
z If the operations of both [CONTROL PANEL] and
[REMOTE CONTROL] are set to [DISABLE],
the projector cannot be turned off (cannot enter
standby).
z When the setting has completed, the menu screen
will disappear. To operate continuously, press the
<MENU> button to display the main menu.
[SECURITY] menu
ENGLISH - 81